Netgear Setup Wizard

Netgear is among one of the foremost providers for networking hardware to the users. They provide some of the best networking hardware that includes routers, extenders, adapters, security cameras and a lot more. Their routers are very reliable and provide very good coverage along with a very user friendly experience. The Netgear routers contain some of the most advanced features that include the Guest Network, Parental Controls, Network Map, Network Speed Test, Media Prioritization and more. The user can gain access to the advanced features after logging in to the router. The login process is very easy and it only takes a couple of minutes of the user’s time. The user can simple login using www.routerlogin.net web domain. The user will need to enter the default information on the admin page of the Netgear router. The default username is “admin” and the default password is “password” for most of the Netgear routers. The username and password are case sensitive.

http://netgearrouterwizard.com

What is the Netgear Router Login Wizard?

The Netgear Setup Wizard is the web interface that deals with the admin login and router configuration process. The user can configure, customize, control, monitor and even repair their network themselves with the help of the Netgear Setup Wizard. After successfully logging in to the router, the user will gain access to the advanced features of the router. Some of the advanced features are as followed:

Netgear routers come with some of the most advanced features and cutting edge technology that are sure to provide the user what they need for years to come. Some of the advanced features are:

  • Advanced QoS (Quality of Service) – This feature allows the router to reach maximum bandwidth and makes sure that there is no latency or any errors with the network. Basically, the QoS feature controls and manages network resources and is applied for network traffic that deals with online gaming, video streaming, VoIP and more to make sure that the user doesn’t face any lag or delay with their network usage.

  • Guest Network – This feature allows the user to create different networks if the use wishes to share their internet with any guests without having to share their main network and its shared contents. This way, the user can share their internet with any guests by creating alternate networks for a limited period of time without having to constantly worry about sharing their main network and the contents shared on it. 

  • MU-MIMO (Multi User, Multi Input Multi Output) – This feature allows the router to communicate with each device simultaneously. This decreases the time the devices have to wait for the signal and speeds up the whole network. This technology basically increases the overall efficiency and capacity of the router, which in turn allows the router to handle much more intensive Wi-Fi activities on different devices.

  • Media Prioritization – This feature allows the user to provide more bandwidth to a particular device that they wish to use. This way, if the user is playing any online games or using any high internet usage application or watching any high quality videos, they can use this feature to provide more bandwidth to the device for lag free usage.

Here, we will help the users understand their routers better by providing the troubleshooting steps to setup and login using www.routerlogin.net admin login page, to reset the router, to change the username and password and to update the firmware of the router.

Troubleshooting steps to setup the Netgear router:

  • Connect the computer desktop or laptop to any of the four internet ports of the router using an Ethernet cable.
  • Now, connect the modem to the WAN port of the router using another Ethernet cable.
  • Make sure that all the connections are made properly on both ends.
  • Switch off all the devices and the switch them back on after a couple of minutes. Wait for the devices to finish booting up.

Now, the Netgear router will have been setup and ready for the user to further configure the router using www.routerlogin.net admin login process.

Netgear Router Login

http://netgearrouterwizard.com

Troubleshooting steps to login to the Netgear router using www.routerlogin.net:

  • Open any web browser and type www.routerlogin.net in the address bar.
  • The user will be taken to the login page for the router. There, the user has to enter the default username and password for the router.
  • The default username is “admin” and the default password is “password” for most of the Netgear routers.
  • After entering the information, the user will have successfully logged in to the router.

Once the user has successfully logged in to the router, the user can easily configure their router with the help of the advanced features.

How to reset the Netgear router? [Troubleshooting steps]

  • Three will be a reset button located at the back of the router inside a very small hole.
  • Using a paper clip or something similar, press and hold the reset button for ten seconds. Release the reset button after ten seconds.
  • Once the power LED light becomes stable, the route will have been reset back to its factory default settings.

Take note that the router must not be unplugged from its power source during the reset process as it can damage the router.

Use a Paperclip to reset the router

http://netgearrouterwizard.com

Troubleshooting steps to update the firmware of the Netgear router using www.routerlogin.net:

http://netgearrouterwizard.com

  • Open an internet browser on the device that is connected to the Netgear router.
  • Now, type www.routerlogin.net in the address bar of the web browser and press enter. A login window will display.
  • The login page will ask the user for the default information. The default username is “admin” and the default password is “password”. The username and password are both case sensitive.
  • Now, click the Router Update button under the Maintenance tab.
  • You will see a Check button. Click the Check button to check for any updates if available.
  • If there is any update available, you will see a display message asking you if you want to download and install it.
  • Click the Yes option to download and install the latest firmware. The firmware will start updating itself. The process usually takes about a couple of minutes.

Take note that the firmware update process must not be interrupted in any way or the router must not be removed from its power source as that can corrupt the firmware and may even render the router useless.

 

TROUBLESHOOTING STEPS TO CHANGE THE USERNAME AND PASSWORD OF THE NETGEAR ROUTER:

  • Open an internet browser and type www.routerlogin.net in the address bar.
  • Enter the default information when prompted. The default username is “admin” and the default password is “password” for most of the Netgear routers.
  • On the System Status, you will see the Network Name (SSID) and the Network Key with the fields provided in front of them respectively.
  • You can enter the new information in front of both the fields.
  • Click Save to save the changes made.

Make sure that the user doesn’t share any sensitive information within the username. Also, make sure that the password is hard for other people to guess.

Now, the user will have configured their router. The user can further modify their network using the simple on screen instructions provided in the web interface for Netgear.

http://netgearrouterwizard.com